When death comes calling the Reapers come out from their dark dwellings. No wonder these coils come to claim their Deathtraps.
This ripper of an Alien was developed to be the perfect fit in the Deathtrap 30mm from Deathwish Modz.
It ohms in at 0.37Ohms and is perfect for any series mech or high powered regulated device. The Reaper is a 4mm id with N80 wrapped over a N80 core, it's ramps fast but has plenty of wire mass to take a bashing.
Comes as single coil only (Can be used as a dual but you will need to purchase two)
Single Coil Ohms: 0.37
Dual Coil Ohms: 0.18
Inner Diameter: 4mm
Rebuilding is for experienced users only and a knowledge of ohms’ law should be considered when building coils for Rebuildable Atomiser's. The distance of the coils from the post can affect the resistance of the build. Always exercise caution building your atomiser, always check your build’s resistance on an ohm reader before firing it on any device. Coils that are touching any part of the deck, air flow controller or any part of the coil touching any of the atomiser's posts can result in a short and can cause serious damage to your devices if not checked on an ohm reader before use. Make sure to use high drain and high amperage batteries when using advanced user devices.