The Ogres were developed to keep all the big boys happy, these babies fit nicely in any 30mm Atty or larger.
They boast a 4mm id with 9 wraps of N80 outer and N80 Core, ohming in at 0.32 the Ogres will suit any series mech or high powered regulated device.
Comes as a set of 2
Dual Coil Ohms: 0.32
Single Coil Ohms: 0.64
Inner Diameter: 4mm
Rebuilding is for experienced users only and a knowledge of ohms’ law should be considered when building coils for Rebuildable Atomiser's. The distance of the coils from the post can affect the resistance of the build. Always exercise caution building your atomiser, always check your build’s resistance on an ohm reader before firing it on any device. Coils that are touching any part of the deck, air flow controller or any part of the coil touching any of the atomiser's posts can result in a short and can cause serious damage to your devices if not checked on an ohm reader before use. Make sure to use high drain and high amperage batteries when using advanced user devices.