DT 26 Alien
On very short notice we asked Dev and Matt from Dev's coils to create the perfect vape for the new Deathwish Deathtrap II.
What we got and .2Ohm 4mm id, with some n90 thrown in.
The results running on a single tube mech are ripping good!!!
Comes as single coil only (Can be used as a dual but you will need to purchase two)
Single Coil Ohms: 0.2
Dual Coil Ohms: 0.1
Inner Daimeter: 4mm
Rebuilding is for experienced users only and a knowledge of ohms’ law should be considered when building coils for Rebuildable Atomiser's. The distance of the coils from the post can affect the resistance of the build. Always exercise caution building your atomiser, always check your build’s resistance on an ohm reader before firing it on any device. Coils that are touching any part of the deck, air flow controller or any part of the coil touching any of the atomiser's posts can result in a short and can cause serious damage to your devices if not checked on an ohm reader before use. Make sure to use high drain and high amperage batteries when using advanced user devices.